 |
Nicad AA Cells, 1.2V 800 mAH (BYD)
Manufactured by the worlds 3rd largest Nicad battery manufacturer, BYD
cells are available individually and are ideal for upgrading Radio systems from dry cell
to nicad operation. These high capacity cells are able to be recharged up to 1000 times. |
$4.00 each |
 |
Receiver Battery Packs, 4.8V 270 mAH
(Hitachi)
This pack offers a great compromise between size and
weight. It is ideal for small and light aircraft and competition aircraft where every bit
of weight counts. You can use a standard 50ma charger with this pack by simply shortening
the charge time to 7 hours. Available in Square and Flat style. Weight is approx. 50
grams.
(NZ 50 cent coin shown for size comparison) |
$30.00 |
 |
Receiver Battery Packs, 4.8V 800 mAH
Square (BYD)
This pack is the same size and weight as the standard pack which is
supplied with many radio systems. We use BYD cells, precision soldered and shrink wrapped
with a lead and 'universal' connector compatible with most modern radios. Available in
Square style. Weight is approx. 100 grams. |
$30.00 |
 |
Receiver Battery Packs, 4.8V 800 mAH
Flat (BYD)
This pack is the same size and weight as the standard pack which is
supplied with many radio systems. We use BYD cells, precision soldered and shrink wrapped
with a lead and 'universal' connector compatible with most modern radios. Available in
Flat style. Weight is approx. 100 grams. |
$30.00 |
 |
Transmitter & Receiver
Nicad Charger (Powertec)
This is a standard AC Charger, as is supplied with many 4 channel
(or greater) radio systems. It charges transmitter and receiver batteries simultaneously
or individually and can be used with most radios. Includes long wire leads with
transmitter and receiver charge plugs. Input: 240V AC, 50/60HZ. Output Tx: 9.6V DC, 60mA.
Output Rx: 4.8V DC, 60mA. Charges 9.6V transmitter batteries and 4.8V receiver packs
overnight (approx 14 hrs). |
$35.00 |
Click Image for Info |
Nicad Battery Discharger
Constant charging of nicad packs and only partial
discharge during flying sessions can in time lead to lowered cell
capacity. This can be prevented by occasional cycling (dicharging the pack
to 1.1 volts per cell and fully recharging, several times). This unit will
safely discharge 4.8V receiver, 7.2V power & 9.6V transmitter packs. A
red LED will light when a battery with voltage above the units cut-off is
connected. The LED will go out and discharge will stop when the auto
cut-off voltage is reached. |
$28.00 |
